0
ر.ق
  • An empty cart

    You have no item in your shopping cart

Product Details

Creality BLTouch V3.1 Auto Bed Leveling Sensor Kit Accessories for Creality Ender 3/ Ender 3 Pro/Ender 5/Ender 5 Pro/CR -10 with 8 Bit V1.1.5 /V1.1.4 Mainboard 3D Printer

200 ر.ق

  • Firmware Download: Please move to the Official Website to download the firmware and flash it at first.(If your mainboard is V1, use it to flash the firmware of V1.1.4 or V1.1.5(8 bit) mainboard, use SD to flash the new Version V4.2.2 or V4.2.7(32 bit) mainboard; if your mainboard is V2, use USB to flash, The circuit wiring of CR-10S, CR-10S4, CR-10S5, CR 20 are different from the manual).
  • Widely Application:Suitable for Ender-3 / Ender-3s / Ender-3 Pro / Ender 5 / Ender 5 Pro/ CR-10/ CR-20 / CR-20 Pro. (NOTE: Can’t use for Ender 3V2, CR-10V2, CR 10S Pro) Please flash the firmware first. Use the ISP cable or SD card to flash the firmware for the V1 mainboard(1284P). Use USB cable to flash for V2 Mainboard(2560P). There are two different versions of instructions for the V1 and V2 mainboards.
  • Easy to Use: BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the Bed surface. Bed leveling is not a problem anymore.
  • Genuine High-Quality Set: Our package was included 1 set of auto bed Leveling Kit and another replacement probe. Simple, smart, and easy to install.
  • Troubleshooting Guide: If your computer does not support Progisp please change to another computer to try. If the USB cannot be recognized we suggest you buy a USB to fix it. If you have any questions while installing or using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.

5 in stock

Compare

Description

Warm Tips of V1 Mainboard:
The Creality has developed the newest version of the 32-bit mainboard with 3d Printer. If you find your mainboard is V1.1.4/V1.1.5, just follow the instruction; if it is the V4.2.2/V4.2.7 version, Please follow the BL touch for the 32-bit mainboard version. Firmware can be downloaded from the Creality Website, Or you can contact us and send you the guidance. Attention, you should check your mainboard version before installing BL touch, and download the corresponding firmware.

NOTE of V2 Mainboard:
1.The circuit wiring of CR-10 S4, CR-10 S5, CR 20 are different from the manual, while Ender 3, Ender 3 Pro, Ender 5, CR-10 are the same as the manual.
3. Use a USB cable to connect CR-10 S4, CR-10 S5, CR 20 with a computer to flash the firmware, the ISP connector and ISP pinboard are not needed.
4. No need to plug the pinboard A into the mainboard of CR-10S4, CR-10 S5, CR 20, just insert the connectors into the mainboard D11 pins and unplug the Z limit switch then insert the connectors into the Z port.

V1 Mainboard(V1.1.4/1.1.5): Ender3, Ender 3 Pro, Ender5, Ender 5 Pro, CR-10
V2 Mainboard: CR-10S, CR-10S4, CR-10S5, CR-20.

 

contact us or you can find us on Facebook
smartqat.com

logo smartqat

Reviews

There are no reviews yet.

Be the first to review “Creality BLTouch V3.1 Auto Bed Leveling Sensor Kit Accessories for Creality Ender 3/ Ender 3 Pro/Ender 5/Ender 5 Pro/CR -10 with 8 Bit V1.1.5 /V1.1.4 Mainboard 3D Printer”

Your email address will not be published. Required fields are marked *