1 X 12864 LCD Control Panel
1 X Smart Adapter to connect with the control board
2 X Flat ribbon Cable 30cm
Display : 128columns x 64lines
Display Size: 3 inches
Supply Voltage (V): 5V
Width : 87mm
Height: 14 mm
This 12864 RepRapDiscount full graphic smart LCD controller compatible with Ramps 1.4 / 1.5/ 1.6, SKR V1.1, V1.3, SKR Pro, MKS Gen V1.4 control boards and supported by Marlin firmware.
This LCD smart controller contains an SD-Card reader, a rotary encoder and a 128×64 LCD display and easily could be connected to RAMPS board using the “smart adapter”.
All functions like calibration, axes movements, Bed levelling could be done by just using the rotary encoder of Smart Controller and no need of a computer to operate 3D printer.
Insert the SD card and Print 3D designs without PC, just with a g-code design stored on the SD card.
Step 1: Download and install U8glib to your ARDUINO IDE’s library folder
Step 2: Edit Configuration.h in Marlin firmware, Search and Uncomment (just remove the // at the beginning)
Step 3: Then Compile and Upload the firmware
Step 4: Power off the Arduino, connect the panel, reapply power, and everything should work.