2.8 Inch SPI TFT LCD
2.8 Inch SPI TFT LCD
2.8 Inch SPI TFT LCD
2.8 Inch SPI TFT LCD

2.8 Inch SPI TFT LCD

  • Sale
  • QAR 55
Shipping calculated at checkout.

Description

Features: –

  • 2.8″ TFT LCD with 240 x 320 resolution
  • 65K colors with ILI9341 controller
  • Resistive touch screen with XPT2046 controller
  • SPI 4-wire interface
  • 3.6 to 5.5V module operation
  • 3.3V logic compatible only
  • It shows a color depth of 262K/65K.
  • Need at least 4 IOs from your MCU
  • The display has a wide viewing angle.
  • Big display with good resolution.

 

DATASHEET:

Datasheet

 

 

2.8 Inch SPI TFT LCD ILI9341 Specifications: –

Name Parameter
Display Color RGB 65K color
SKU have touch screen: MSP2807
have no touch screen: MSP2806
Screen Size 2.8(inch)
Type TFT
Driver IC ILI9341
Resolution 320*240 (Pixel)
Module Interface 4-wire SPI interface
Active Area (AA area) 43.2×57.6(mm)
Module PCB Size 50.0×86.0(mm)
Operating Temperature -20℃~60℃
Storage Temperature -30℃~70℃
VCC power voltage 3.3V~5V
Logic IO port voltage 3.3V(TTL)
Power Consumption TBD
Rough Weight(Package containing) No touch: 34(g) / With touch: 43(g)


2.8 Inch SPI TFT LCD ILI9341 Pin Configuration: –

 

NO SYMBOL FUNCTION
1 GND Ground
2 LED+ Anode of LED backlight.
3 LED- Cathode of LED backlight.
4 GND Ground
5 VDD Power supply(TYP:2.8V).
6 RESET System reset pin.
7 SDA Serial data input pin and output pin(SDA) in serial bus system
interface I. Serial data input pin (SDI) in serial bus system interface II. The data is inputted on the rising edge of the SCL signal.
If not used, please let it open or connected to VSSD.
8 SCL (NWR) Write enable pin I80 parallel bus system interface.
(SCL) server as serial data clock in serial bus system interface
when IFSEL=0.
Fix it to IOVCC or VSSD level when not used.
9 CS Chip select signal.
Low: chip can be accessed;
High: chip cannot be accessed. Must be connected to VSSD if
not in use.
10 RS Command / parameter or display data selection pin
11 GND Ground
12 SDO Serial data output pin (SDO) in serial bus system interface II.
If not used, please open this pin.
13 TE Tearing effect output.
If not used, please open this pin
14 IM3 serial interface I  /  serial interface II 
15 GND Ground
16 NC No connect
17 NC No connect
18 NC No connect
19 NC No connect
20 GND Ground