CP2102 USB 2.0 to TTL UART Module 6 Pin Serial Converter STC Replace FT232 Adapter Module 3.3V/5V Power
CP2102 is high integration, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART), supports full-featured modem signals, without any external USB device. CP2102 with other USB-UART adapter circuit works similar to the PC through the driver's USB port into a virtual COM port in order to achieve the purpose of expansion.
Brand new and high quality.
PCB Dimensions: 26.5mm * 15.6mm PCB
Weight: 4g using a new chip factory in 2013 CP2102 with a self-recovery fuse. In the event of an accidental short circuit, it can effectively protect your computer USB port and Downloader with three LEDs: power indicator, data reception indicator, the data trans indicator, working status with 3.3V and 5V dual power output pin leads to all sorts of useful with reset signal output, etc. directly to the for Arduino board Pro mini download!
Supported operating systems: Windows 98/Me/2000/XP/7, OS-9,OS, X-Windows CE, Linux 2.40 or later
1. included USB transceiver, without external circuit device
2. includes a clock circuit, no external circuitry is
3. includes power-on reset circuit
4. chip 3.3V voltage regulator output voltage can be
5. Meet the USB2.0 specification requirements
6. SUSPEND pin supports USB suspend state
7. asynchronous serial data bus compatible with all handshake and modulation controller interface signals
8. Supported data format is 8 data bits, 1 stop bit and parity bits
9. connotation 512 byte receive buffer and 512 bytes transmit buffer
10. Supports hardware handshaking or X-ON/X-OFF PackageIncluded: 1PCS*6Pin CP2102 Module