Economical and practical sensor Immediate implementation Exploitation of the results clear and fast with the tools of the Scientific Workshop
This seismic sensor allows, only by placing it, to measure the wave generated by a shock or by a mechanical break. It is directly recognized by the Scientific Workshop, so you can easily create curves that can be used by the student.
Associated with the 'Seismic and temperature' model ref. 507 043, you will determine if the temperature has an influence on the propagation of the seismic wave. By using the Sismo sensor together with a temperature sensor ref. 482 101, you will highlight the difference in speed of the seismic wave according to the temperature of the support.
With 2 Sismo sensors or a Sismo sensor and a Synchro adapter ref. 482 062, you will highlight the shift between the 2 signals, and you will calculate the speed of the wave. It is then possible to compare the results obtained for different materials.
The tools included in the Scientific Workshop allow rapid and clear exploitation of the results.
Works with a Tooxy ® , Foxy ® or AirNeXT ® ExAO console.
Type de produit
ExAO Foxy, Tooxy et AirNeXT
Piezoelectric cell. Caliber:± 100 aos Gain adjustment. Use in connected mode only.
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device